I used this for a few weeks on a Nuffield 1060 tractor. The tractors hydraulics were weak for running my backhoe attachment and this pump worked better than good. I also have the 20 or 25 gallon hydraulic oil tank with adaptors and hydraulic hoses which can sell as a package or separately.
The Prince C593 PTO pump is a hydraulic gear pump designed for tractor PTO (power take-off) drive operation. It features a design that allows it to slide onto the tractor's PTO shaft, eliminating the need for an additional gearbox. These pumps are available with either an aluminum or cast iron center section, offering options for different duty cycles.
Key Features and Specifications:
PTO Drive: Specifically designed for connection to a tractor's PTO shaft for power transfer.
No Gearbox Required: The pump slides directly onto the PTO shaft, simplifying installation.
Self-Adjusting Wear Plates: Ensures optimal performance and longevity.
Center Housing: Available in aluminum (standard duty) or cast iron (high duty).
Roller Bearings: Enhance durability and efficiency.
Internally Splined Drive Shaft: 1 3/8" diameter with 6 or 21 teeth.
Maximum Pressure: 2250 PSI.
Flow Rate: Up to 40 gallons per minute.
Input Speed: 540 RPM (6 tooth shaft) or 1000 RPM (21 tooth shaft).
Inlet/Outlet Ports: SAE 16 inlet and SAE 12 outlet.
Weight: 37.99 lbs.
Displacement: 5.7 cubic inches (CID).

The tank is 16”x16”x19”. I think it is 25 gallon but not positive, it came from princess auto but I don't see this exact unit on their website, very similar tank is selling for 299 without the fittings or hoses.
The pump currently sells for around $800 depending on where you can source it, princess auto only shows a similar, likely Chinese unit for $629.

Asking 300 for the pump and 125 for the tank hoses and fittings.
When you call please mention you found this ad listing on OKz.ca