This is now selling for $3276 Cdn used on Reverb.com:
https://coleclarkguitars.com/portfolio-item/fl2ec-rdbl/

It is a cutaway acoustic guitar with that is an all-solid Redwood top with Blackwood sides and back. It includes a hardshell tweed case and black Cole Clark leather strap.

I haven't used it in over a year (gone electric!) so it's time to pass it on.

I am the original owner and it's been humidified and taken care of since I bought it in 2019. However, there are a few cosmetic dings and one noteable scratch on the front of the guitar (which is what happens when a guitar has been played for a number of years). I've tried to capture these in the pictures.

The guitar looks beautiful and sounds even better (plugged or unplugged) because of the Cole Clark PG3 pickup system.

The pickguard is only laying on top of the guitar in the picture, so you have the option of peeling the sticker and putting it on if you want.

Here's some info from the web:

The Cole Clark pickup is not an afterthought installed at the end of the production line. We build our system into the guitar as it goes through production. The concept behind our pickup is best explained by comparing it to an audio system. A P.A has subwoofers, speakers, and horns, each designed to hear a range of frequencies they are best equipped to handle and crossover points for frequencies best heard by the next component. Cole Clark uses the same 3 component philosophy with a piezo system for the bottom end, a patented face sensor for the mid-range and a microphone for the top end.
All Cole Clark pickups and preamps are proudly made in Melbourne, Australia.
Analogue 3-Way System
Our most popular preamp, the analog 3-way is the ‘Cole Clark sound' heard the world over.
The Piezo system utilizes individual piezo elements suspended under the bridge saddle which we believe is the best and most dynamic type of piezo system available.
We know that the face/top is the most important component to the sound of an acoustic guitar, so it makes sense that we utilize that tone when amplifying the guitar. We do this with our unique face sensor which is specifically designed for the mid-range. We use a patented blend control which blends in the amount of face sensor required to go with the piezo sound or to completely replace the piezo in the mid-range. This goes a long way in removing the ‘piezo quack', delivering a more natural tone. With a maximum crossover point of 350hz, the face sensor cannot hear any frequency in its feedback zone, instead, leaving those frequencies to the under saddle piezo.
The third element is a condenser microphone for the top end. This microphone is set well above any feedback zone and is purely there to take the ‘ping' out of the piezo if there is some piezo blended through at full range.
• Cole Clark Fat Lady 2 Redwood Acoustic-Electric
• Dreadnought Body Shape
• Solid Redwood Top
• Solid Australian Blackwood Back, and Sides
• Queensland Maple Neck
• Oak Fretboard w/Abalone Snowflake Inlays
• 1.73" Nut Width
• Inlaid Wood Binding, Purfling, and Rosette
• Oak Bridge
• Grover Tuners
• Graph Tech TUSQ Nut and Saddle
• Pickguard Included (so you can choose if you want it on there or not)
• Cole Clark Proprietary 3-Way Pickup System
• Deluxe Hardshell Case
• Instrument Weight: 4.3 lbs
When you call please mention you found this ad listing on OKz.ca